The Stereo Flamingo
"The Flamingo Stereo" is the latest member of the Flamingo line and has a FET preamp with two large diaphragm cardioid condenser capsules for stereo pick-up.
Rotating large spherical metal mesh heads can be easily positioned and the microphone includes an integrated elastic studio suspension with swivel mount. The original visual design and handmade expertly finished components complement the superb sound quality of the twin JZ capsules.
"I am absolutely amazed at the sound reproduction that comes from the Violet microphones. The Flamingo Stereo has a warm sound overall without sacrificing presence or clarity."
Roscoe Mitchel
Composer/Jazz Instrumentalist
The Stereo Flamingo Technical Specifications
| Download the Spec Sheet PDF | Spec Sheet  |
| Diaphragm's Diameter (inch/mm) | 1"/26 mm |
| Polar Pattern | Cardioid |
| Output Impedance | 50 ohms |
| Rated Impedance | 1000 ohms |
| Suggested Load Impedance | > 500 ohms |
| Frequency Range | 20 Hz to 20 kHz |
| Sensitivity @ 1000 Hz | 21.5 mV/PA |
| S/N Ratio CCIR 468-3 Weighted | 76.5 dB |
| S/N Ratio DIN/IEC 651 A-weighted | 87.5 dB-A |
| Equivalent Noise Level | 6.5 dB-A |
| Maximum SPL (<0.5% @ 1000 Hz) | 133.5 dB |
| Preamplifier's Dynamic Range | 275 db |
| Electronics Type | SS |
| Powering +48V Phantom or PSU | PH |
| Polarity | pin 2 in phase |
| Output Transformer | N |
| Output Connector | XLR-3M |
| Dimensions (inch/mm) | 6.3 x 8.66" 157 x 219 mm |
| Weight (lbs/grams) | 2.4 lb/1080 g |
| Included Accessories | Wooden box |
